E Lower Mattress Position - ubabub Pod U0400 Instrucciones

E
Lower mattress position
Step 1 Determine if you need your mattress at the upper or lower position.
Step 2 If lower position is required continue to Step 3, if upper position is required
turn to Section F.
Step 3 Select mattress base, using two adults lower base into position. It will rest on
inside edge of Plastic Base.
Step 4 Select 20mm bolts.
Step 5 Align Mattress Base with bolt holes and attach one bolt at each end.
Finger tighten.
Step 6 Install two remaining bolts then tighten all four bolts with Allen Key.
Step 7 Screw in six 10mm length bolts to cover the holes for upper mattress
support braces. Please Note: Do not over-tighten.
Step 8 Proceed to Section H.
4 x 20mm Bolt
14
6 x 10mm Bolt