STIL 6040 Consejos De Uso página 21

Recommended separation distances between portable and mobile RF communications equipment and the device
The device is intended for use in an electromagnetic environment in which radiated therefore disturbances are controlled.
The customer or the user of the device can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communicationsequipment (transmitters) and the device as recommended below, accor-
ding to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watts (W) according to the transmitter manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance for the higer frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Separation distance according to frequency of transmitter m
80 MHz à 800 MHz
0,12
0,38
1,2
3,8
12
800 MHz à 2.7 Ghz
0,23
0,73
2,3
7,3
23
21