Operating Instructions; Connecting The Programming Cable; Care And Maintenance; Cleaning And Maintenance - Advanced Bionics CI-5826 Manual Del Usuario

Operating Instructions

Connecting the Programming Cable

• Plug the micro-HDMI end of the programming
cable into the CPI-3.
• Slide the Naída CI M or Sky CI M sound processor
onto the connector of the programming cable.
• Verify that the sound processor appears in the
Target CI fitting software.
• To remove the sound processor, slide the
Naída CI M or Sky CI M sound processor off of
the connector of the programming cable.
P S
ower uPPly
M Programming
Cable

Care and Maintenance

Cleaning and Maintenance

The M Programming Cable should be kept free from dirt
and dust. Clean and dry thoroughly after any exposure
to dust, dirt, fluids, or high humidity. Clean the contacts
as needed using a dry cotton swab. Do not immerse
the M Programming Cable in liquid.
10
r V
ated oltage
5.0 V
t r
yPe ated
DC 1.25W
P
ower