Hergom COMPACTO C-10 Instrucciones Para Instalación, Uso Y Mantenimiento página 19

3. DISMANTLING THE VENTILATOR
ATTENTION! Make sure that the appliance is unplugged before handling any electrical parts.
To change the ventilators proceed as follows:
Fig. 1
2. Loosen the tw o screws that
attach the ventilator support (fig 3).
4. Replace the ventilator and
put it back in position by
follow ing
instructions but in the reverse
order.
4. ELECTRICAL OUTLINE
A
Fig. 3
the above
Term. 50ºC
L
N
T
1. Take out ash pan "A".
(Figs 1 and 2)
Fig. 2
3. Remove the ventilator by
tilting it slightly (fig 4).
Disconnect the faston terminals
B
of the ventilator.
220V.
M.V.
50Hz.
22W.
220V.
50Hz.
M.V.
22W.
Fig. 4