Operating Your Super Retro® Trio Plus Console - Retro-Bit SUPER RETRO TRIO+ Manual De Instrucciones

Operating your Super Retro® Trio Plus Console
Connecting the Super Retro® Trio Plus Console AC Adapter
1. Plug the DC end of included power adapter into the DC socket on the back of the Super
Retro® Trio Plus Console
2. Plug the other end of the power adapter into wall outlet
Precautions on Using the Super Retro® Trio Plus Adapter
Use ONLY the Super Retro® Trio Plus AC Adapter included.
•
Using a different AC Adapter can damage your Super Retro® Trio Plus Console
•
When not in use, unplug the AC adapter from the electrical outlet.
•
Do not leave the system or any of its parts in direct sunlight, in damp areas or near a heater.
•
Do not disassemble the console or any of its parts. Doing so will void the 60-day warranty
•
offered by Retro-Bit®.
Setting the TV Channel
1. Make sure the HDMI® or Audio/Video Cable is connected correctly.
2. Select the Audio/Video Input setting on your TV, monitor, VCR or DVD Player that corresponds
to the input connection your console is plugged into (e.g., "Video 1").
Operating your Super Retro® Trio Plus Console
1. Make sure the power is "Off"
2. Plug your Super Retro® Trio Controllers into the respective Controller Slots on the Front of
the console (see next section for more details on using controllers).
3. Insert the game cartridge, label facing forward, into the cartridge slot. Press it fully into the
slot until secure.
4. To turn the power on, slide the power switch on to select the corresponding game cartridge.
• 8- bit indicator—Lights up green when playing NES® game cartridges
• 16- bit indicator—Lights up red when playing SNES® game cartridges
• Genesis® indicator—Lights up blue when playing GENESIS® game cartridges
5. To reset to the game's start screen during game play, press the "Reset" button on the
console to the left of the power switch
Note: Never attempt to remove a cartridge from the console while the power is switched
on.
Connecting your controllers to your Super Retro® Trio Plus Console
Super Retro® Trio Plus Console Controller Ports arrangement:
You may use your Super Retro® Trio Plus controllers to play games for all three consoles. Simply plug
the controller into the SNES® controller port and move the Controller Select Switch to the SNES®
position. Follow these same directions if you wish to use an original or other third-party Genesis®
controller, or if you wish to use an included Super Retro® Trio Plus controllers with your NES® game
cartridges.
If you wish to use an original or other third-party NES® or SNES® controller, insert it into the correct
controller port and move the Controller Selector Switch to the position. You cannot use the SR3
controllers while the Controller Selector Switch is on the position.
All trademarks and registered trademarks are property of their respective owners. © 2012 Kool Brands LLC.
EN
5