Turn On/Off Handsfree; Menu Operations; The Main Menu - ideus VV960 Manual Del Usario

Manos libres bluetooth
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
VV960
2.3

Turn on/off Handsfree

Turn on the Device: Press and hold button
screen and two power-up tones are heard, this indicates the handsfree is now turned on.
Turn off the Device: Press and hold button
power-down tones are heard, this indicates that the handsfree is now turned off.
Reset: If the device can not be power on, and OLED has no display, the following
operations can help you:
1.
Make sure the power cable is plugged into the device.
2.
Hold button
some tones, LED light up, etc. But just keep holding the button, ignore others.
3.
Release button , then doing the normal power on procedure.
4.
The device shall be on.
2.4

Menu Operations

2.4.1

The Main Menu

A user friendly control menu is provided for assisting the user to use the product. Listed
below are menu page contents and the usage of each menu item:
l
Enter Pairing Mode: Selecting this item will let the device enter paring mode
l
Delete Paired Info: Selecting this item will delete all the paring records stored in
the device
l
Delete Phonebook: Selecting this will delete all the phonebook records stored
in the device
l
Sync Phonebook: Selecting this item will synchronize the device local
phonebook records with the records stored in the handset. Note that, this menu
item is displayed on the screen only if the HF/HS connection between the
handset and the handsfree is on. And, it only works with compatible handsets.
l
Backlight Time: Selecting this item will lead to a second level sub-menu shown
below. The user can continue to pick a sub-menu item to adjust screen
protection time.
­
10 Sec
­
20 Sec
­
60 Sec
­
Always On
l
Brightness: Selecting this item will let the user adjust the brightness of
displayed fonts and icon indicators following the brightness indication bar
showed on the screen.
­
Brightness
l
SW Version: Selecting this menu will let the user find the 8-digit ("XXXXYYZZ")
SW version used by the device, as shown below.
­
SW Version
for 3 seconds until the screen is off and two
for at least 15 seconds. During this period, you may hear
38
for 3 seconds until "VV960" appears on the

Publicidad

Tabla de contenido
loading

Tabla de contenido