Troubleshooting - Steren SWI-008 Manual De Instrucciones

Trouble
The Power
LED is not lit
The Activity LED is
not lit when a device
is connected to the
corresponding port

Troubleshooting

Make sure the AC power Adapter is plugged into an outlet
properly and it's connector is plugged into the power jack of the
switch.
Make sure the power source is ON.
Make sure you are using the power adapter supplied with your
switch.
Make sure that the cable connectors are firmly plugged into the
Switch and the device.
Make sure the connected device is turned on and its adapter is
installed correctly and is working.
The cable must be less than 328 feet long.
Solutions
9