Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
Check position of nerf board and ensure it is properly parallel with rocker panel. Adjust as needed.
5
Fully tighten body mount bolts and torque
6
to factory specifications.
Inspection After Installation
• Inspect all bolts and nuts for proper tightness.
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Congratulations!
You have purchased one of the many quality Lund
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
Fully tighten all bolt locations to secure nerf bar to vehicle.
Repeat Steps 1 thru 6 for driver side.
®
branded products offered by Lund International, Inc. We take the utmost pride in
800-241-7219 • Visit us at lundinternational.com
© 2013 Lund International, Inc. All rights reserved.
Lund
and the Lund
logo are trademarks of Lund International, Inc.
®
®
Fully tighten bracket mounting bolts.
Lund International
Page 3 of 3
Publicidad
Tabla de contenido
