Bosch UniversalGrassCut 18 Manual Original página 20

20 | English
tool on. A wrench or a key left at-
tached to a rotating part of the
power tool may result in personal in-
jury.
Do not overreach. Keep proper
u
footing and balance at all times,
never run. This enables better con-
trol of the power tool in unexpected
situations.
Dress properly. Do not wear loose
u
clothing or jewellery. Keep your
hair and clothing away from mov-
ing parts. Loose clothes, jewellery
or long hair can be caught in moving
parts. Always wear substantial foot-
wear and long trousers while operat-
ing the power tool.
If devices are provided for the con-
u
nection of dust extraction and col-
lection facilities, ensure these are
connected and properly used. Use
of dust collection can reduce dust-
related hazards.
Do not let familiarity gained from
u
frequent use of tools allow you to
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within
a fraction of a second.
Power tool use and care
Do not force the power tool. Use
u
the correct power tool for your ap-
plication. The correct power tool
will do the job better and safer at the
rate for which it was designed.
F 016 L81 803 | (28.02.2019)
Do not use the power tool if the
u
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
Disconnect the plug from the
u
power source and/or remove the
battery pack, if detachable, from
the power tool before making any
adjustments, changing accessor-
ies, or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool ac-
cidentally.
Store idle power tools out of the
u
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for
u
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
the power tool's operation. If dam-
aged, have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
Keep cutting tools sharp and
u
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the power tool, accessories
u
and tool bits etc. in accordance
Bosch Power Tools