Control Panel; Cleaning And Maintenance; Water Tank - Pur Line HYDRO 9 Manual De Instrucciones

CONTROL PANEL

CLEANING AND MAINTENANCE

In case when the water is hard which means water contains too much calcium and magnesium, they can cause
"white powder" problem and give heavy scum on the surface of water basin, transducer and inner surface of
the water tank. Scum on the surface of transducer will make the unit work improperly.
WE RECOMMEND:
• Use filtered water or distilled water.
• Clean the unit every week.
• Change the water in water tank more often to keep it fresh.
• Clean the whole unit, and make sure to keep all parts of the unit dry completely when the unit is not in use.

WATER TANK:

Open the cover, add some detergent and warm water into the water tank and soak it for 2 minutes. Then
clean the inside of water tank with a clean brush. Rinse out the unit with fresh water.
OUTER SURFACE OF THE UNIT:
Wipe the surface of the unit with a soft, damp cloth if needed..
DESCALING:
• Depending on usage and water type, it may require you to clean weekly or every other week in order to
remove scale.
• If you live in a hard water area, we recommend distilled water for your humidifier to help reduce the
precipitation of minerals or white dust.
• Do not clean the unit or water tank with harsh detergents or cleaning chemicals. A humidifier cleaner
capsule may be used to keep tank free of hard mineral deposits.
EN
Power:
Press to turn on/off the device.
Timer:
1-12 horas
Press to define how long you want the humidifier to work
before it automatically turns off.
Each press adds 1 hour.
Light
Press "Light" button once, 7 colors cyclic light, so the color
can not be fixed.Press it again, turn the light off.
Sleep Mode:turn off the screen by long pressing for at
least 3 seconds.
Mist:
3 adjustable mist modes (low/medium/high).
9