Maintenance; Maintenance Schedule - Honda Power Products F220 Manual De Explicaciones

The purpose of the maintenance schedule is to keep the tiller in the
best operating condition. Inspect or service as scheduled in the table
below.
Shut off the engine before performing any maintenance. Exhaust
contains poisonous carbon monoxide gas; Exposures cause loss of
consciousness and may lead to death. If the engine must be run, make
sure the area is well ventilated.
CAUTION:
Use only genuine Honda parts or their equivalent for maintenance or
repair. Replacement parts which are not of equivalent quality may
damage the tiller.

Maintenance schedule

REGULAR SERVICE PERIOD (2)
Perform at every indicated month or
operating hour intervals, whichever
comes first.
ITEM
Engine oil
Air cleaner
Tiller outside
Clutch lever function
Engine operation
Wiring and cables
Bolts and nuts tightness
Transmission oil
Spark plug
Spark arrester (applicable types) Clean
Throttle cable
Clutch cable
Clutch shoes
Idle speed
Fuel tank (fuel filter)
Valve clearance
Combustion chamber
Fuel tube
(1) Service every 10 operation hours or every day when used in dusty areas.
(2) Log hours of operation to determine proper maintenance intervals.
(3) These items should be serviced by your servicing dealer.
(4) Change engine oil every 50 hours when used under heavy load or in high ambient
temperatures.
(5) In Europe and other countries where the machinery directive 2006/42/EC is enforced, this
cleaning should be done by your servicing dealer.
After
storage
Check level
Change
Check
Clean
Replace
Check
Check
Check
Check
Check-tightness
Check
Check-adjust
Replace
Check-adjust
Check-adjust
Check
Check-adjust
Clean o (3)
Check-adjust
Clean
Check

8. MAINTENANCE

First
Each month
use or
20 hrs.
o
o o
o
o
o
o
o
o
o
o
After every 300 hrs. (3)
Every 2 years (Replace if necessary) (3)
Every Every Every
3 month 6 month year
or or or
50 hrs. 100 hrs. 300 hrs.
o (4)
o (1)
o
o
o
o (5)
o
o
o (3)
o (3)
o (3)
o (3)
31