JVC GC-XA1 Guia Basica Del Usuario página 18

Ocultar thumbs Ver también para GC-XA1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Trouble Shooting
Problem/Situation
Cannot turn on the camera/ The
power turns off suddenly.
Camera cannot be turned on
after plugging power adapter.
Wi-Fi icon does not appear after
activating Wi-Fi.
The camera is frozen.
When the camera is connected
to the PC via USB cable, many
Autoplay windows may pop out.
They indicate the disks of the
camera.
The LCD shows "Connection
Failed".
Wi-Fi connections break off.
Connecting a USB cable stops
photography. Photography is
not possible with a USB cable
connected.
There is no HDMI output.
The thermometer icon appears.
Remediation/Solution
Battery pack is weak or depleted. Recharge the battery pack.
Please make sure that you use the JVC original power adapter and
connect it to the power outlet correctly.
Battery is low. Recharge the battery pack.
Please remove the battery/unplug the adapter. Then, insert the
battery/plug the adapter and turn on the camera again.
"DV" indicates the internal memory of the camera.
"Removable Disk" indicates the external memory (memory card
installed in the camera).
"WiVideo" indicates the bundled program. Please double-click it to
start installation automatically.
The password configuration does not match to the AP device you
want to connect.
The camera is not in the wireless network service area or weak
network signal. Please make sure the Access Point is able to access
the Internet.
The camera does not support the type of encryption used on the
AP device.
The social websites update their websites without notice. Please visit
the website to update your account setting or upgrade your camera
firmware.
The camera disables any Wi-Fi connection three minutes after
shooting starts. Use the menu to re-enable it.
Reconnect in a clear radio environment. Remember that the
communication speed drops, interfering with connection, if the
receiver is too far away, there is something in between blocking
communications, or there is a microwave or wireless equipment in
use nearby.
Only time lapse and endless recording are available with a USB cable
connected. (Endless recording is limited to 720p 30 fps.)
HDMI output is disabled during recording.
Turn off the camera and allow it time to cool down.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido