Replacing The O-Ring On The M Waterproof Battery - Advanced Bionics CI-5068 Instrucciones De Uso

Remember to wipe the battery case with a soft, lint-free
cloth and air dry overnight after any water related
activities. Continue use of the Slim HP or RF cable and
appropriate UHP.

Replacing the O-Ring on the M Waterproof Battery

The M Waterproof Battery O-Ring should be inspected
prior to each use and will need to be changed periodically.
If damage to the O-Ring is observed or suspected, replace
prior to resuming use. The M Waterproof Battery and
O-Ring should be rinsed following submersion in salt or
chlorine treated water.
To remove the existing O-Ring, use your fingers to lift a
portion of the old O-Ring out of the M Waterproof Battery.
Once a portion of the O-Ring is lifted out, hold the O-Ring
and pull the remaining portion out of the M Waterproof
Battery mounting groove.
21