Giroo Heli 3.5CH R/C Manual De Usuario página 20

① Before flying, turn on the power switch of remote controller firstly, then turn on the power switch of helicopter.
After finishing flying, turn off the helicopter power switch firstly then turn off the power switch of remote controller.
② When low battery of remote controller or helicopter, the remote control distance will be affected.
If the indicator light of remote controller keeps flashing, the battery is low and change new batteries.
If the helicopter can not fly high or hard to take off, it means the helicopter is in low battery.
Please push "ON/OFF" key of helicopter to "OFF" position and charge the helicopter.
③ Please charge the helicopter full while not using in a long time. Push "ON/OFF" key of power supply to "OFF" position
and take out of batteries from the remote controller.
④ When helicopter bump into obstacles, pull back the control lever of remote controller to the original state.
⑤ This product can be controlled to fly within the radii of 30 meters. Please keep it fly within 30 meters.
Otherwise, the helicopter will be out of control.
⑥ Stop playing if the helicopter is damaged or distortion.
Product list
Veer at a fixed point.
Straight forward→leftward→forward→leftward,
square practice.
Caution
- 20-
Spot landing.
"8" font practice.