General Maintenance - Craftsman 130.16491 Manual Del Propietário

ADJUSTING THE EXTENSION
BARS (Fig. 17)
1. Extend the extension bar to the
required position to properly
support the workpiece.
2. Fully tighten the two extension-
bar locking knobs (J).
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged by
their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING: Keep the miter saw stand dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never use brake fluids,
gasoline, petroleum based products or any strong solvent to clean the stand.
Chemicals can damage, weaken or destroy plastic which may result in serious
personal injury.
16491 Manual_Revised_1 -0
Fig. 17
MAINTENANCE
J
A
L
Page 13