Allied Vision Mako G Serie Guía Rápida página 13

Powering up the camera
Plug the 8-pin Hirose connector into the camera and wait for the boot phase to
complete.
Hirose 8-pin connector: colors and pins for power supply
When connecting an open-ended cable to a Hirose 8-pin connector, ensure that
the pins are connected to the correct wire as described in the table below. Note
that for powering up the camera, the power connection is necessary only.
7
8 6
5
12
Pin
7
4
3 1
2
8
Color Signal
Orange
Camera
dot
Power
Black
Orange Camera
dot Red GND
I/O Level
12 to 24 VDC
In
± 10%
GND for
In external
power
Description
Camera
power supply
Ground for
camera
power supply