Teddington P Serie Instrucciones De Uso página 15

You can choose between wall and ceiling mounting:
All specified anchor points on the air curtain system must be used on site! Special mounting
materials can be obtained from Teddington. The mounting materials must be adapted to the
local situation, if necessary the statics have to be checked. The delivered mounting parts must
be checked, if it is appropriate for using. They have to be exchanged if they are not matching
ATTENTION the local needs. Only the installing company is responsible for the safe mounting of the unit.
All water and electrical installations can only be performed exclusively by specialized
companies (such as HVAC companies, electritians). Otherwise, Teddington Luftschleieranlagen
GmbH cannot assume any warranty.
ATTENTION
9. Control unit of your air curtain system
You can find detailed information about the control unit of your air curtain system in seperate operating
instructions. Please ensure that the serial number given on the cover is identical.
10. Maintenance of your air curtain system
Your air curtain system is maintenance-free.
For wall mounting special wall mounting accessories (type WHK-PB 2-3) are
anchored to the wall with anchors for heavy loads. Depending on system length 2
or 3 single holder consoles are needed. The air curtain system can be mounted
by screwing the wall holder consoles into prepared blind rivet nuts on the air
curtain´s top with adequate screws or threaded bolts that are connected with
vibration absorbers.
For ceiling mounting, 2 special ceiling mounting accessories (type DH/DHD-4-6,
depending on system length) are screwed into prepared blind rivet nuts on the air
curtain system's top and anchored into the ceiling above the door with anchors for
heavy loads. Adjusting of the turnbuckles allows alignment horizontally at the
correct height.
15