Technical Specifications; Electrical Specifications; Optical Accuracy And Calibration; Environmental Specifications - Spectro-UV AccuPRO Serie Manual Del Operador

2.1 AccuPRO™ PARTS
AccuPRO™ Meter with
Multi-Wavelength Sensor
XP-2000 (AccuPRO) and XP-4000
(AccuPRO Plus)
Soft Carrying Case
XCC-200
AC Battery Charger
(North American plug shown, see
replacement parts for complete list)
Rechargeable AAA Nickel-Metal
Hydride batteries (4)
COMPONENTS AND REPLACEMENT PARTS
Part No. Description
XP-2000 AccuPRO Dual Sensor (UV-A/VIS), Multilingual
Display Meter
XP-4000 AccuPRO Plus 3-in-1 Sensor (UV-A/VIS/Blue),
Multilingual Display Meter, Complete with (4)
Rechargeable "AAA" Nickel-Metal Hydride
Batteries, AC Charger and Carrying Case
(100-120V/50-50Hz)
XCC-200 Soft Carrying Case
XP-2000/F XP-2000 (with 230V/50Hz European Plug)
XP-2000/FB XP-2000 with UK Plug (230V/50Hz)
XP-2000/FA XP-2000 with Australia/China Plug
(220-240V/50Hz)
XP-4000/F XP-4000 with European Plug (230V/50Hz)
XP-400/FB XP-4000 with UK Plug (230V/50Hz)
XP-4000/FA XP-4000 with Australia/China Plug
(220-240V/50Hz)
129450 AC Charger with North American Plug (120V/60Hz)
129451 AC Charger with European Plug (230V/50Hz)
129453 AC Charger with UK Plug (230V/50Hz)
129452 AC Charger with Australia/China Plug (220-240V/50Hz)

2.2 TECHNICAL SPECIFICATIONS

Part Length
Readout 6 in
Unit (15.2 cm)
Sensor 3.0 in
(7.6 cm)

2.3 ELECTRICAL SPECIFICATIONS

A full charge of the four nickel-metal hydride batteries
(using the included AC battery charger) will take 8
hours and provide approximately 6 hours of active
scanning.

2.4 OPTICAL ACCURACY AND CALIBRATION

The AccuPRO XP-2000 and XP-4000 readout units
measure both ultraviolet and visible light. The AccuPRO
Plus (XP-4000) also measures blue light. The LCD
readout features ±0.2% linearity with the sensor
sending the linearity correction data to the readout unit
during initial power-up. The sensor is designed with
superior band-pass filters and the optical stacks are
assembled in Class 100 clean workstations to ensure
consistent results. For precise spectral coverage, these
high-quality interference filters will effectively resist
degradation. See Section 8 for additional calibration-
related information.
If recalibration is required, Contact Spectro-UV at
1-866-230-7305 for assistance.

2.5 ENVIRONMENTAL SPECIFICATIONS

The AccuPRO meter series components are designed
to be safe under the following conditions:
• Indoor use;
• Altitude up to 2,000 m (6,562 ft.);
• Temperature 5°C to 40°C (41°F to 104°F);
• Maximum relative humidity 80% for temperatures
up to 31°C (88°F) decreasing linearly to 50% rela-
tive humidity at 40°C (104°F);
• Mains supply voltage fluctuations not to exceed
±10% of the nominal voltage;
• Installation Category II;
• Pollution Degree 2.
4
DIMENSIONS
Width Depth Weight
3.0 in 1.0 in 8 oz
(7.6 cm) (2.5cm) (227 gm)
2.0 in 0.5 in 5.6 oz
(5.1 cm) (1.25 cm) (158.7gm)