ASROCK B450M Pro4-F Manual Del Usuario página 31

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 14)
Serial ATA3 Connectors
(SATA3_1:
see p.1, No. 12) (Upper)
(SATA3_2:
see p.1, No. 11) (Lower)
(SATA3_3:
see p.1, No. 9) (Upper)
(SATA3_4:
see p.1, No. 10) (Lower)
AMD LED Fan USB
Header
(4-pin USB_7)
(see p.1, No. 8)
USB 2.0 Headers
(9-pin USB_3_4)
(see p.1, No. 16)
(9-pin USB_5_6)
(see p.1, No. 17)
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
+5V
the chassis speaker to this
header.
1
PLED+
PLED+
PLED-
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* M2_2 and SATA3_3
share lanes. If either one
of them is in use, the other
one will be disabled.
This header is used for
connecting the USB
connector on the AMD
SR3 Heatsink.
There are two headers
USB_PWR
P-
on this motherboard.
P+
GND
DUMMY
Each USB 2.0 header can
support two ports.
1
GND
P+
P-
USB_PWR
B450M Pro4-F
29