DJI FPV AIR UNIT Guia De Inicio Rapido página 5

B.
1. Power on the air unit and the DJI FPV Remote Controller.
2. Press the link button on the air unit, and then press the record
button, C button, and right dial on the remote controller
simultaneously.*
3. Both the linking status indicators turn solid green when
successfully linked.
* When ready to link, the devices will give the following indication:
Air unit: the linking status indicator turns solid red.
Goggles: the goggles beep continually.
Remote controller: the remote controller beeps continually and
the status indicator blinks blue.
Specifications
Weight
Dimensions
Operating Frequency
Transmitter Power (EIRP)
Min. Latency (end-to-end)
Max. Transmission Distance FCC/SRRC: 4 km; CE: 0.7 km;
Video Format
I/O Interface
Supported Flight
Control System
Operating
Temperature Range
Input Power
Camera
4
Air Unit (camera included): 45.8 g
Antenna: 3.74 g (MMCX straight);
3.9 g (MMCX elbow);
6 g (reverse polarity female SMA)
Air Unit: 44×37.8×14.4 mm
Camera: 27.4×21.1×20.1 mm
Coaxial Cable: 100 mm
5.725-5.850 GHz
FCC/SRRC: <30 dBm;
CE: <14 dBm
Low Latency Mode (720p 120fps):
<28 ms;
High Quality Mode (720p 60fps):
<40 ms
MP4 (Video format: H.264;
Audio format: AAC-LC)
USB-C, MMCX, 3-in-1 port,
microSD card slot
BetaFlight
0° to 40° C (32° to 104° F)
7.4-17.6 V
Sensor: 1/3.2" CMOS; Effective
Pixels: 4 M
Lens: 2.1 mm, f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150° (D); 122° (H); 93° (V)