Descargar Imprimir esta página

Publicidad

Enlaces rápidos

s
Shield Kit
Installation Instructions / Instructivo de Instalación
Hazardous Voltage
Will cause death or serious injury
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers and close the enclosure door before
power supplying this device is turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados por Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOTE - These instructions do not purport to cover
all details or variations in equipment, or to provide
for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be desired or
should particular problems arise, which are not
covered sufficiently for the purchaser's purposes,
the matter should be referred to the local Siemens
sales office. The contents of this instruction
manual shall not become part of or modify any
prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in
the contract between the parties is the sole
warranty of Siemens. Any statements contained
herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc.
The remaining trademarks in this publication may
be trademarks whose use by third parties for their
own purposes could violate the rights of the owner.
For Use With: 30-200 Amp Type VBII Fusible Disconnect Switches
Para Usar Con Caja Base: 30-200 Amp Type VBII Fusible Disconnect Switches
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
1 / 6 English
Released Production, 0P v3, Jul 15, 2011
For Use with
Cat No.
Switch Amperages
HSK61
30 Amp
HSK623
60 / 100 Amp
HSK64
200 Amp
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Cal. ISO 6789
I.L. No. 500551A00

Publicidad

loading

Resumen de contenidos para Siemens HSK61

  • Página 1 Should further information be desired or should particular problems arise, which are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the local Siemens sales office. The contents of this instruction manual shall not become part of or modify any prior or existing agreement, commitment or relationship.
  • Página 2: Unpacking Instructions

    Unpacking Instructions 1.) Shield with door 2.) #10-32 x 5/16 inch screw I.L. No. 500551A00 2 / 6 English Released Production, 0P v3, Jul 15, 2011...
  • Página 3 Hazardous Voltage Tensión peligrosa. Tension dangereuse. Will cause death or serious injury Puede causar la muerte o lesiones graves. Danger de mort ou risque de blessures graves. Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio. Couper l'alimentation de l'appareil et barrer avant de working on this device.
  • Página 4 Step 4 Install screws, item 2, leaving approx 1/8 inch between screw and base plate. 1/8 inch I.L. No. 500551A00 4 / 6 English Released Production, 0P v3, Jul 15, 2011...
  • Página 5 Hazardous Voltage Tensión peligrosa. Tension dangereuse. Will cause death or serious injury Puede causar la muerte o lesiones graves. Danger de mort ou risque de blessures graves. Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio. Couper l'alimentation de l'appareil et barrer avant de working on this device.
  • Página 6 Step 7 Replace all covers and close the enclosure door before power supplying this device is turned on. Technical Support: Telephone: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution Subject to change without prior notice © Siemens Industry Inc. 2010 Siemens Industry, Inc. , Norcross, GA 30092 U.S.A. 6 / 6 English I.L. No. 500551A00 Released Production, 0P v3, Jul 15, 2011...
  • Página 7 Use only with Siemens certified Components. Utilizar únicamente con componentes certificados por Siemens. A utiliser uniquement avec les composants certifiés Siemens. Cal. ISO 6789 NOTE – Ces instructions ne prétendent pas couvrir tous les détails et variations de l’équipement, ou fournir toutes les éventualités à...
  • Página 8: Instructions De Déballage

    Instructions de déballage 1.) Bouclier protecteur avec porte 2.) Vis #10-32 x 5/16 pouce I.L. No. 500551A00 2 / 6 French Released Production, 0P v3, Jul 15, 2011...
  • Página 9 Hazardous Voltage Tensión peligrosa. Tension dangereuse. Will cause death or serious injury Puede causar la muerte o lesiones graves. Danger de mort ou risque de blessures graves. Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio. Couper l'alimentation de l'appareil et barrer avant de working on this device.
  • Página 10 Étape 4 Installer les vis, item 2, en laissant approximativement 1/8 de pouce entre la vis et la plaque de la base. 1/8 pouce I.L. No. 500551A00 4 / 6 French Released Production, 0P v3, Jul 15, 2011...
  • Página 11 Hazardous Voltage Tensión peligrosa. Tension dangereuse. Will cause death or serious injury Puede causar la muerte o lesiones graves. Danger de mort ou risque de blessures graves. Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio. Couper l'alimentation de l'appareil et barrer avant de working on this device.
  • Página 12: Couple De Serrage

    Étape 7 Replacer tous les couverts et fermer la porte du boitier avant de mettre cet appareil sous tension. Support technique Téléphone: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution Suiet à changement sans préavis © Siemens Industry Inc. 2010 Siemens Industry, Inc. , Norcross, GA 30092 U.S.A. 6 / 6 French I.L. No. 500551A00 Released Production, 0P v3, Jul 15, 2011...

Este manual también es adecuado para:

Hsk623Hsk64