Haworth Comforto 89 Manual Del Usuario página 3

Comforto 89
Ito Design
8
Headrest-Adjustment (optional)
8
Move the headrest up and down to adjust it to your body height and preference.
Castors:
All castors we use comply with the DIN 12529 standard. Chairs are supplied with
castors suited for carpets as standard. For use on hard surfaces, soft tread castors are
recommended for safety reasons and must be specified at the time of ordering.
Gas lift:
The operational swivel chair Comforto 89 is supplied with the Comforto lift. The gas lift
is subject to normal wear and tear. Should it need to be replaced, please contact your
responsible dealer.
Attention: Do not attempt to replace the gas lift yourself! Leave it to the experts.
Quality furniture can only look and feel good in the long run if it is properly cleaned and
cared for. Regular care and proper cleaning will extend the life of your Haworth furniture
and enhance its visual and haptic appeal. Detailed instructions on how to care for
different materials are to be found on the Haworth website and below.
Upholstery care:
Haworth textiles are comfortable due to their air permeability and absorptive qualities.
To maintain the appearance of the upholstery, brush or vacuum occasionally. To remove
stains and pressure points or to brighten up the colours, use an appropriate spray cleaner,
following the manufacturer's instructions. Brush off dried foam residue thoroughly.
Leather care:
Care is hardly necessary – a natural patina is desirable. Dust leather furnishings regularly
with a soft cloth. In case of heavy soiling, use a damp, not wet, chamois leather or cloth
dipped in a lukewarm mild soap solution.
Metal components:
Wipe with a mild detergent and warm water. For chair bases, avoid getting the moving
parts damp.
Warranty:
Your new Haworth chair is designed in accordance with the latest physiological and
ergonomic standards using state of the art technology. Haworth has been certified
according to DIN EN ISO 9001:2008+BS OHSAS 18001:2007. Continuous quality
control combined with craftsmanship in production guarantees solid functionality
and enables Haworth to provide extensive warranties for the product as stated in the
General Conditions of Sale and Delivery. This warranty excludes the results of obvious
maltreatment, or wear and tear to the upholstery and the effects of normal usage.
Environmental issues:
Haworth chairs are designed to last for a very long time. Care is taken to conserve
energy and protect the environment when procuring the necessary materials and during
production. Haworth feels responsible for its products for the life of its products. For these
reasons, Haworth has been certified according to DIN ISO 14001:2004 + COR1:2009. You
have purchased a Haworth product built with the utmost care and in accordance with the
NF Environment certification scheme. This means a two-fold assurance:
· Guaranteed quality and durability; a solid, safe, long-lasting furniture.
· Low environmental impacts throughout the product life cycle.
This product contains none of the Substances of Very High Concern (SVHC) with a
concentration above 0.1% w/w. The product has been designed for easy disassembly.
Its different materials are marked, can be isolated from one another and separately re-
processed. Depending to the countries, we can provide you with a range of end of life
management solutions, depending on available infrastructures for re-use and/or recycling.
Bedienungsanleitung
EN
DE