1
3
C
NOTE: Please do not fully tighten all bolts until you finish assembling the frame. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Align and attach the Small Legs (C) to the Large Leg (B) with four 1/2" Bolts (1) and four Flat Washers
(3). Tighten the bolts with the provided hex wrench.
Assembly Instructions
1
3
1/2" Bolt
(4 used in this step)
①
1
3
1
B
3
Flat Washer
(4 used in this step)
③
4
C