Functions - GE G8H0AASSPSS Manual Del Propietário

Functions

Assembly of Attachments
Blending Attachment:
1. Align the motor body with the blending attachment,
then slide the pieces together. Twist the motor body
clockwise and feel the pieces click together.
Chopper/Grinder Attachment:
2. The metal blade assembly shaft is attached to the
bottom of the prep bowl. If not already in place, slide
the blade assembly over the top of the metal blade
assembly shaft.
WARNING
HOLD THE BLADE ASSEMBLY BY
THE PLASTIC STEM ONLY. DO NOT TOUCH THE
RAZOR-SHARP BLADES.
3. The chopper cover can only sit into the prep bowl. It
cannot be rotated.
4. Connect the motor body to the top of the chopper/
grinder attachment cover.
5. Plug the power cord into an electrical outlet.
6. Put one hand on the cover of the chopper/grinder
attachment, while gripping the handle with the other.
the motor and run the chopper/grinder. To turn the unit
7. WHEN THE BLADE STOPS MOVING, unplug the
Hand Blender, remove the motor body from the
chopper/grinder cover, and remove the cover from the
prep bowl.
Whisk attachment:
Align the motor body with the blending attachment, then
slide the pieces together. Twist the motor body clockwise
and feel the pieces click together.
Operation
Blending & mixing:
The specially designed blade is for mixing and stirring
all kinds of foods, including salad dressings, powdered
drink products, and sauces. It is ideal for combining dry
ingredients, and can be used to emulsify mayonnaise, too.
This blade mixes and stirs while adding only a minimum of
air to your mixture. A gentle up-and-down motion is all you
Be careful never to remove the blender from the liquid
while in operation to avoid splatters.
6
1. Insert the blending attachment into the motor body.
2. Plug electrical cord into an electrical wall socket.
3. Insert blending shaft into mixture to be blended.
will continue to run as long as the switch is pressed in.
and the motor will stop.
5. Do not hold the button On for longer than 50 seconds
at a time.
6. Unplug immediately after use.
NOTE: When using blender in a saucepan, remove pan
from stove.
Whisking:
1. Insert the whisk attachment into the motor body.
2. Plug electrical cord into an electrical wall socket.
3. Insert the whisk into mixture to be blended.
4. Press and hold the desired speed button. When done
whisking, release the speed button.
5. Unplug immediately after use.
Chopping and Grinding Processing Food:
countertop.
2. Put food into the prep bowl. Be sure the food is cut into
small pieces, and the bowl is not overloaded.
3. Put the chopper/grinder cover on top of the prep bowl.
Be sure the cover is properly seated.
4. Press the ON/OFF button.
NOTE: Due to the powerful motor provided with this
unit, it is recommended using one hand to support the
chopper/grinder during operation.
7. WHEN THE BLADE STOPS MOVING, remove the
blender motor body from the chopper/grinder cover,
and remove the cover from the chopper/grinder.
8. Unplug the unit.
9. Carefully remove the blade assembly, holding it by
the gripping the plastic stem. NEVER TOUCH THE
BLADE ITSELF.
10. Remove food with the spatula. Note: Do not operate
the Chopper/Grinder attachment without food in the
prep bowl.
49-9000008 Rev. 0