WARNING!
34
1) The nylon line continues to rotate after
the motor is switched off.
2) Do not put your hands or feet near
or under the rotating parts when the
machine rotating.
3) Never pick up or carry the trimmer while
the motor is running.
Always ensure that ventilation openings
35
are kept clear of debris.
36
Take care against injury from the blade
fitted for trimming the cutting line.
37
After extending new cutting line, always
return the machine to its normal position
before switching on.
38
When using a hand controlled electric
tool, feed the cable over your shoulder,
this should prevent you cutting through it.
39
If the cable is damaged or curled,
disconnect the plug
Read the instruction manual
prior to operation.
Wear eye and
ear protection.
Do not expose to moisture.
Use safety shoes.
Danger, electric
equipment.
SYMBOL EXPLANATION
It should not be exposed to moisture.
WARNING! There is a sharp blade fitted
to the guard for cutting the line to
length. Keep your fingers clear.
IMPORTANT NOTE!
Remove the mains plug from
socket before carrying out any
adjustment or servicing.
IMPORTANT WARNING!
Make 2 minutes of break every
15 minutes of continuous work.
Follow this manual instructions
to prevent overloading the motor.
Bad use may cause loss of
warranty.
Warning!
Disconnect the mains plug
if the cord is damaged or
entangled.
Do not touch the trimmer line
before it stops completely.
Keep bystanders away.
21