QUICK OPERATING GUIDE
Stacked dryers DSD-11 / 17
1 OPERATION
1.1
OPERATION PRINCIPLE AND DESCRIPTION:
The machine dries the fibres passing hot air through the textile fibres. This air drags the humidity and
sends it to the outside.
Steps for correct drying:
Choose the same type of fibre. Do not mix different types of fibres in a drying cycle.
Load the dryer.
Open the power supplies to the machine.
Choose the drying programme using the microprocessor.
Push the START cycle button.
Remove the load at the end of the cycle.
WARNING. REMOVING THE LOAD WITHOUT CARRYING OUT THE COOL-DOWN
(PROGRESSIVE COOLING) MAY CAUSE BURNS AND DAMAGE THE APPLIANCE.
23