Input Connectors - Tektronix DMM912 Manual Del Usuario

Input connectors

C V . Input connector for volts, ohms, frequency,
continuity, temperature, capacitance, and diode measure-
ments.
COM. Common connector (ground reference). All mea-
surements are referenced to this connector.
WARNING.
damage, do not exceed more than a 1000 VDC
potential between the C V
between the COM connector or between earth
ground and these connectors.
Maximum open circuit voltage for the A mA
and A connectors is 600 V.
1–18
To avoid personal injury and product
input or
DMM912/914/916