Installation Instructions - Crosley XSS23G Manual Del Propietario E Instrucciones De Instalación

Installation Instructions

BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
•
for local inspector's use
IMPORTANT
•
codes and ordinances .
• Note to Installer – Be sure to leave these
instructions with the Consumer .
• Note to Consumer – Keep these instructions for
future reference .
• Skill level – Installation of this appliance requires
basic mechanical skills .
• Completion time – Refrigerator Installation
• Proper installation is the responsibility of the
installer .
• Product failure due to improper installation is not
covered under the Warranty .
If the refrigerator has already been installed, remove
the base grille (see Step 2 in Moving the Refrigerator),
then skip to Step 5 in Installing the Refrigerator .
49-1000105 Rev. 0
—
Save these instructions
—
Observe all governing
30 minutes
Water Line Installation
30 minutes
Refrigerator Models
XSS23G, XSS25G
PREPARATION
WATER SUPPLY TO THE ICEMAKER
(on some models)
If the refrigerator has an icemaker, it will have to be
connected to a cold water line . A water supply kit is
available at extra cost from your dealer, by visiting our
Website at GEAppliances.com, or from Parts and
Accessories, 877 .959 .8688 .
TOOLS YOU WILL NEED
3/8" and 5/16" Socket
Plastic Putty Knife
Phillips Head Screwdriver
1/2" and 7/16" Wrench
17