How To Charge Your Yeti Tank - GOAL ZERO YETI TANK Guia Del Usuario

ETI
CHARGING YOUR YETI TANK
When Link and Tank are properly installed and the power source is correctly
plugged in to the 8mm port of the Yeti Link, the Input Charge Indicator light
on the Link will turn blue and the Lead Acid State of Charge Indicator light
will begin flashing green. NOTE: Upon plugin, all LEDs on the Link will turn
on, then off before correct lights are displayed. Power source will charge
the Yeti Lithium first. When the Yeti Lithium is fully charged, power will
begin to store in the Yeti Tank.
NOTE
The 8mm input port on the Yeti Link is the only way to charge both the
Yeti Lithium and Yeti Tank. Input ports on the Yeti Lithium display will only
charge the Yeti Lithium, not the Yeti Tank.
WARNING: Tipping hazard - do not stack Tanks more than two high.
Yeti Tank
Expansion Battery
Female Chaining Cable
Male Chaining Cable
5 5