Samsung DW50T6060 Serie Manual De Instalación página 20

Installation
STEP 8 Final check
1. Remove all foam, paper packaging, and unnecessary parts from inside the dishwasher.
2. Turn the circuit breaker on.
3. Open the water valve to supply water to the dishwasher.
4. Plug in the dishwasher.
5. Turn the dishwasher on, and then select and run a cycle.
6. Check if the dishwasher turns on normally and if there are any water leaks while the
dishwasher is operating. Make sure to check for water leaks on both ends of the water
line and the drain hose connector.
7. Check if the kick plate gasket is attached to the bottom of the kick plate. To install the
kick plate, see the Kick plate section below.
Kick plate
If you want to install the kickplate, follow these instructions.
20 English
DW50T6060US_AA_DD81-03056A-00_EN.indd 20
1. Adjusting the front legs will un-level the
unit, and cause interference with the
counter.
2. Attach the kickplate to the dishwasher
using the kickplate brackets. Make sure
the kickplate brackets are in the correct
direction. See the figure for details.
2020-05-14 오후 6:09:09