Aqua Medic S Manual De Instrucciones página 8

Picture 2: Regulating flow is done through changing the width of the gap inside the reactor, by
turning the knob on top of the unit. The pump is connected at the bottom of the unit and can be
adjusted as well.
Picture 3: 1. Set screw holding unit for aquarium glass 2. Set screw holding unit body 3. Outer
tube / body 4. Inner tube 5. Sponge 6. Closure cap of inner tube
The multi reactors S and M can be used with different filter media such as activated carbon (i. e.
Aqua Medic carbolit, 4 mm), phosphate and silicate remover (i. e. Aqua Medic antiphos FE), zeolite,
and many others.
8