Compliance With Standards - pizzato ANT Serie Instrucciones De Uso

8.7 Technical data of the integrated control devices
8.7.1 General data
Mechanical endurance (spring-return button): 1 million operating cycles
Actuating force (spring-return button): 4 N min, 100 N max
8.7.2 Contact block
Material of the contacts:
Contact type:
interruption
Utilization category:
8.7.3 Electrical data
Thermal current I :
th2
Rated insulation voltage U :
i2
Rated impulse withstand voltage U
imp2
LED supply voltage:
Single LED supply current:

8.8 Compliance with standards

For articles with integrated electrical parts:
IEC 60947-5-1, EN 60947-5-1, IEC 60947-1, EN 60947-1, IEC 60529, EN 60529,
EN 50581, UL 508, CSA 22.2 N. 14.
8.9 Compliance with the requirements of:
For articles with integrated electrical parts:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
For all products:
RoHS Directive 2011/65/EU
9 SPECIAL VERSIONS ON REQUEST
Special versions of the device are available on request.
The special versions may differ substantially from the indications in these operating
instructions.
The installer must ensure that he has received written information from the support
service regarding installation and use of the special version requested.
10 DISPOSAL
At the end of service life product must be disposed of properly, according to the rules
in force in the country in which the disposal takes place.
11 SUPPORT
The device can be used for safeguarding people's physical safety, therefore in case of
any doubt concerning installation or operation methods, always contact our technical
support service:
Pizzato Elettrica Srl
Via Torino, 1 - 36063 Marostica (VI) - ITALY
Telephone +39.0424.470.930
E-mail tech@pizzato.com
www.pizzato.com
Our support service provides assistance in Italian and English.
DISCLAIMER:
Subject to modifications without prior notice and errors excepted. The data given in this sheet are accurately
checked and refer to typical mass production values. The device descriptions and its applications, the fields
of application, the external control details, as well as information on installation and operation, are provided
to the best of our knowledge. This does not in any way mean that the characteristics described may entail
legal liabilities extending beyond the "General Terms of Sale", as stated in the Pizzato Elettrica general
catalogue. Customers/users are not absolved from the obligation to read and understand our information
and recommendations and pertinent technical standards, before using the products for their own purposes.
Taking into account the great variety of applications and possible connections of the device, the examples
and diagrams given in the present manual are to be considered as merely descriptive; the user is deemed
responsible for checking that the specific application of the device complies with current standards. This
document is a translation of the original instructions. In case of discrepancy between the present sheet and
the original copy, the Italian version shall prevail. All rights to the contents of this publication are reserved in
accordance with current legislation on the protection of intellectual property. The reproduction, publication,
distribution and modification, total or partial, of all or part of the original material contained therein (including,
but not limited to, texts, images, graphics), whether on paper or in electronic form, are expressly prohibited
without written permission from Pizzato Elettrica Srl.
All rights reserved. © 2021 Copyright Pizzato Elettrica
Silver contacts
Self-cleaning contacts with
DC-13; U = 24 V, I = 0,55 A
e2 e2
1 A
32 Vac/dc
: 1.5 kV
24 Vdc ± 15%
10 mA
double
8/24