Dmx Mode - American Pro STROBOTEC 2 Manual Del Usuario

2. Dimming Mode
Press the "MODE", the LED display will show "CoNS", enter to LED dimming mode
Lightly press the "SETUP", to set the lamp brightness.
Sheet 4 dimming mode settings
Settings options
C000 LED dimming, through UP or DOWN adjust the brightness value ( 0—255 )
3. Sound Active
There are four sound programs: sound programs 1, sound programs 2, sound programs 3, sound programs 4.
Press the "MODE" select the sound programs, through UP or DOWN select the built-in sound programs "SoUI
-- SoU4".
Lightly press the "SETUP", enter to sound programs settings, as below sheet.
Sheet 5 Sound active programs
SoU1
SU04
Son2
SU04
SoU3
C000
SU04
SoU4
C000

4. DMX Mode

Press the "MODE", the LED display will show "d512", enter to LED DMX mode main interface.
Lightly press the "SETUP", enter into DMX address, DMX working mode setting.
Sheet 6 DMX Mode Settings
Setting options
d001 DMX address setting(1 -512), through UP or DOWN set the address
4-ch Through UP or DOWN select CH1, CH4, CH6, CH7 mode
Working mode 1: "1-ch"
Sheet 7 DMX Mode Function Sheet of CH1
CHANNEL VALUE
1 0-255
Working mode 2: "4-ch"
Sheet 8 DMX Mode Function Sheet of CH4
CHANNEL VALUE
1
2
0-255
3
4
Working mode 3: "6-ch"
Sheet 9 DMX Mode Function Sheet of CH6
CHANNEL VALUE
1
2
3 0-255
4
5
0-9
6
0-255
Operation
Press UP or DOWN set the sound active sensitivity(0—31)
Press UP or DOWN set the LED brightness (0—255)
Press UP or DOWN set the sound active sensitivity(0—31)
Press UP or DOWN set the LED brightness (0—255)
FUNCTION
White, (whole 0-100%)
FUNCTION
Part 1 (bottom-right)
Part 2 (bottom-left)
Part 3 (upper-right)
Part 4 (upper-left)
Strobe, the greater the value, the higher the frequency
PAG. 3
Operation instruction
FUNCTION
Part 1 (bottom-right)
Part 2 (bottom-left)
Part 3 (upper-right)
Part 4 (upper-left)
Master Dimming
NO USE