HyLoft 00777 Instrucciones De Montaje página 3

Installation time: Approximately 30 minutes.
Important: Read through entire instructions before beginning any installations.
1. Install Shelf Brackets into Wall Studs
IMPORTANT: Do not over-tighten the Lag Screws (max 10 ft. lbs.).
They only need to be fully seated, no more. Do not use an impact driver.
Page 3
1A:
Using a stud-finder, locate studs
approximately 24" to 32" apart.
1B:
Mark hole locations with pencil
and pre-drill with 3/16" drill bit.
Important: Make sure hole
locations are level before
drilling holes.
1C:
Rub bar soap or
add a drop of
liquid soap to the
threads of the
Lag Screws (C) to
ease installation.
Install Brackets
(B) with (3) Lag
Screws (C) using
1/2" nut driver or
socket wrench.