INNOLIVING INN-074 Manual De Istrucciones página 7

GB
objects. Never use the product while having a bath or a shower. Never touch the pro-
duct or its power cord with wet hands. Never place the product on a wet or hot surface,
this might damage the unit. In order to protect children from electrical shocks or other
accidents, never leave the appliance unattended when it is plugged in and always store
it out of their reach.
Use this product only for its intended purpose, as described in this instruction manual.
Any other use is improper and therefore hazardous. Use original accessories only. The
product is for an indoor use only. Servicing of this product should be done by qualified
centres only and replacing components must be original.
HOW THE PRODUCT WORKS
Place the bag with the plug upwards on a flat and stable surface. Plug in the power cord
in the plastic part of the bag and connect the plug to socket, see pictures on page 6. LED
indicator on power cord lights on. MucCaldo heats up rapidly (10-15 minutes) and safely.
At the end of the heating- phase, the temperature of its surface reaches approximately 50°C
and the LED indicator on the power cord turns off. The heating time is about 15 minutes.
Disconnect the power cord from the socket and the product. The hot water bag is ready
to use. INN-074 remains hot for 2 to 6 hours, depending on the outside temperature.
When the bag is cool, it's possible to heat it up again.
After the use, always store the bag in a clean and dry place, keep it away from heating
sources and sun rays . Humidity might damage the product.
In case or skin eruptions, wounds, inflammations, blood circulation ailments address to
your physician before treating this part with the product.
This product is not a medical device and it's not suitable for professional medical treat-
ments. This appliance is for home use only.
In case of rheumatic pains, dysmenorrhoea, cephalea, muscle/bone pains or any other
diseases, please consult your doctor before use.
7