Care And Cleaning; Troubleshooting - Commercial Electric 54620311 Guía De Uso Y Cuidado

Care and Cleaning

CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or r
from the fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Troubleshooting

Before doing any work on the fixture, disconnect power to the light fixture.
WARNING:
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the circuit breaker
trips when the light is turned on.
The Bluetooth speaker will not pair with a
smart device.
There is no sound or poor sound quality
from the speaker.
Possible Cause
The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the power
wire is grounding out.
The Bluetooth feature is turned off on
the smart device.
The smart device is out of range of the
Bluetooth speaker.
The smart device is not discoverable.
The smart device did not automatically
connect to the Bluetooth speaker.
The flush mount is not powered on.
Interference is causing confusion with
the connection.
Music settings on the smart device
need to be adjusted.
The Bluetooth feature is turned off on
the smart device.
The Bluetooth device is too far away
from the flush mount speaker.
Interference is causing confusion with
the connection.
Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call Commercial Electric customer service 1-877-527-0313.
Ensure the Bluetooth function is turned on within the device settings.
A Bluetooth symbol should be visible somewhere on the device screen.
Charge up the device being paired with the flush mount. Smart power management may
have turned off the Bluetooth function when low on power.
Be sure the flush mount is within 33 ft. (10 m) of the smart device.
Turn on "Discoverable" mode on the device to allow the flush mount and smart device to
recognize each other.
Confirm the device's "Discoverable" mode is turned on to allow the flush mount and smart
device to recognize each other.
Go to the pairing list on the device and manually connect the device to the flush mount.
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Power both the device and the flush mount off and back on.
Power off other devices the flush mount has previously been connected to.
Delete the flush mount from the smart device and rediscover it.
Move away from Wi-Fi routers or computers that could be causing interference.
Turn music on from the smart device.
Turn volume up from the smart device.
Ensure the Bluetooth function is turned on within the device settings.
A Bluetooth symbol should be visible somewhere on the device screen.
Charge up the device being paired with the flush mount.
Smart power management may have turned off the Bluetooth function when low on power.
Move the device closer to the flush mount/speaker.
Power both the device and the flush mount off and back on.
Re-pair the device and the flush mount speaker.
When successfully paired, the speaker will emit a brief series of tones to indicate that your
device is connected.
Power off other Bluetooth devices within a 33 ft.
proximity range. Only one device can be connected
to the flush mount/speaker at a time.
7
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM