Care And Cleaning; Troubleshooting - Commercial Electric 56516141 Guía De Uso Y Cuidado

Care and Cleaning

CaUTIOn: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Troubleshooting

Before doing any work on the fixture, disconnect power to the light fixture.
WarnInG:
Minor problems often can be fixed without the help of an electrician.
problem
The fixture will not light.
The fuse blows or the
circuit breaker trips when
the light is turned on.
The Bluetooth speaker
will not pair with a smart
device.
There is no sound or poor
sound quality from the
speaker.
possible Cause
The power is off.
The circuit breaker is off.
There is a bad connection. • Check to ensure proper wire connections are made.
There is a defective
switch.
The wires are crossed
or the power wire is
grounding out.
The Bluetooth feature is
turned off on the smart
device.
The smart device is out
of range of the Bluetooth
speaker.
The smart device is not
discoverable.
The smart device did not
automatically connect to
the Bluetooth speaker.
The Spin Light is not
®
powered on.
Interference is causing
confusion with the
connection.
Music settings on the
smart device need to be
adjusted.
The Bluetooth feature is
turned off on the smart
device.
The Bluetooth device is
too far away from the Spin
Light speaker.
®
Interference is causing
confusion with the
connection.
Solution
• Ensure the power supply is on.
• Ensure the circuit breaker is in the on position.
• Contact a qualified electrician.
• Contact a qualified electrician.
• Check the wire connections.
• Contact a qualified electrician or call Commercial Electric customer service 1-877-
527-0313.
• Ensure the Bluetooth function is turned on within the device settings.
A Bluetooth symbol should be visible somewhere on the device screen.
• Charge up the device being paired with the Spin Light
may have turned off the Bluetooth function when low on power.
• Be sure the Spin Light is within 33 ft. (10 m) of the smart device.
®
• Turn on "Discoverable" mode on the device to allow the Spin Light
device to recognize each other.
• Confirm the device's "Discoverable" mode is turned on to allow the flushmount and
smart device to recognize each other.
• Go to the pairing list on the device and manually connect the device to the Spin
Light .
®
• Ensure the power supply is on.
• Ensure the circuit breaker is in the on position.
• Power both the device and the Spin Light
• Power off other devices the Spin Light
• Delete the Spin Light from the smart device and rediscover it.
®
• Move away from Wi-Fi routers or computers that could be causing interference.
• Turn music on from the smart device.
• Turn volume up from the smart device.
• Ensure the Bluetooth function is turned on within the device settings.
A Bluetooth symbol should be visible somewhere on the device screen.
• Charge up the device being paired with the Spin Light
may have turned off the Bluetooth function when low on power.
• Move the device closer to the Spin Light
• Power both the device and the Spin Light
• Re-pair the device and the Spin Light
speaker will emit a brief series of tones to indicate that your device is connected.
• Power off other Bluetooth devices within a 33 ft. proximity range. Only one device
can be connected to the Spin Light
5
. Smart power management
®
off and back on.
®
has previously been connected to.
®
. Smart power management
®
/speaker.
®
off and back on.
®
speaker. When successfully paired, the
®
/speaker at a time.
®
Please contact 1-877-527-0313 for further assistance.
and smart
®
HOMEDEPOT.COM