Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Transporting the machine
1- Use the hydraulic system of the tractor to lift the machine a little.
2- Remove the locking pin (5) from the safety device (1) and release the lever (9).
3- Turn the machine to the rear, until the pin fastened to the end of the rope (2) engages automatically.
Parking: After the machine is in the transport position, lower the support base (10), fastening it to the
cotter pin (8). Lower the machine until the ground and disengage it from the tractor.
Maintenance
BEWARE
14
Disconnect the power take-off, the tractor motor, and remove the key from the
ignition before performing any adjustment, maintenance or cleaning job on the
machine.
Also remember that suspended equipment on the hydraulic supports is not
completely safe. We recommend placing an appropriate shim to prop it up so
that you can safely perform the maintenance job under the machine.
Instructions Manual
Publicidad
Capítulos
Tabla de contenido
