Cleaning; Installation Of The Filters - Amcor NanoMax AI2000EH El Manual Del Propietario

Always unplug the unit from the power supply (wall outlet) before
beginning the cleaning.
Housing
Use a soft, damp cloth to wipe the body clean. Never use strong
chemicals, oil-based products, detergents, chemically treated cloths or
other cleaning solutions. These could possibly damage the housing.
Filter
Use a vacuum cleaner or tap the filter lightly to remove loose dust
and dirt from the filters and then rinse them thoroughly under running
water (not warmer than 104°F).
Dry thoroughly before replacing.
Notice! Never operate the air conditioner without the filters.
Installation of Carbon Filter
It is recommended to replace an active
carbon filter at the start of the season.
• Remove the top filter frame from
the unit by pulling it out.
• Separate the fixer from the filter frame.
• Insert the active carbon filter into the
filter frame, underneath the tabs.
• Re-fit the filter frame inside the unit.

Cleaning

10