Conversion Kit; Contents Of The Kit; Reminder Concerning The Fuel Oil Connection; Fitting The Burner Conversion Kit - BDR Thermea Group 22SE Manual De Instrucciones

1

Conversion kit

1.1

Contents of the kit

Fig.11
1.2

Reminder concerning the fuel oil connection

1.3

Fitting the burner conversion kit

7731652 - V02 - 20062019
1 A 25 W preheater
2 Two cable ties
3 An electrode block
4 An NL6 internal air deflector
5 A 0.50/60°A nozzle for 24 kW boilers
6 A 0.60/60°A nozzle for 32 kW boilers
A kit manual
A preheater manual
MW-4000349-1
Caution
The presence of air in the fuel oil may adversely affect start-ups
and cause clogging of the burner's combustion head. It must
therefore be ensured that all air is removed from the fuel oil.
If a single tube filter is used:
Always use a single tube filter with a built-in deaerator (FloCo-Top type)
to optimise the removal of residual air which is likely to be present in the
fuel oil line.
Ensure the sections recommended by the filter manufacturer are used
as these sections are smaller than those of a dual tube filter.
Before any intervention:
1. Switch off the power supply to the burner by pressing the main switch
on the installation.
2. Disconnect the power supply cord from the burner.
en
1 Conversion kit
15