Descargar Imprimir esta página

Signature Hardware BAYHAVEN 949780 Manual De Instrucciones

Publicidad

Enlaces rápidos

B AY H A V E N
CONSOLE SINK WITH TRADITIONAL TOP
FREGADERO DE CONSOLA CON TAPA TRADICIONAL
SKU: 949780
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing �xtures. Signature
Hardware accepts no liability for any damage to the
console, plumbing, sink, or for personal injury during
installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping
damage. If any damage is found, contact our
Customer Relations team at 1-800-221-3379.
ANTES DE COMENZAR
Le recomendamos que consulte a un profesional si no
sabe cómo instalar accesorios de plomería.
Hardware no asume ninguna responsabilidad con
respecto a los daños causados a la consola, plomería,
lavabo, encimera ni por daños personales que ocurran
durante la instalación.
Cumpla con todas las normas locales de plomería y
construcción.
Retire el producto del empaque y verifique que no se
hayan producido daños durante el envío. Si encuentra
algún daño, comuníquese con nuestro equipo de
Servicios al cliente al 1-800-221-3379.
GETTING STARTED
Ensure that you have gathered all the required
materials that are needed for the installation.
CÓMO COMENZAR
Asegúrese de haber reunido todos los materiales
necesarios para la instalación.
For Warranty information, please visit: signaturehardware.com/services/warranty
Para obtener información sobre la garantía, visite: signaturehardware.com/services/warranty
TOOLS AND MATERIALS:
HERRAMIENTAS Y MATERIALES:
Taladro
Socket Wrench
Llave de dados
Signature
Marcador
1
Drill
Silicone Sealant
(100% Neutral Cure)
Sellador de silicona
(100% curado neutro)
¼" Drill Bit
Broca de ¼
de pulgada
Marker
Level
Nivelador
Tape Measure
Cinta métrica
REVISED 05/20/2020
CODES: SHCL200
SHCTT27211, SHCTT27218
1.800.221.3379

Publicidad

loading

Resumen de contenidos para Signature Hardware BAYHAVEN 949780

  • Página 1 B AY H A V E N CONSOLE SINK WITH TRADITIONAL TOP FREGADERO DE CONSOLA CON TAPA TRADICIONAL SKU: 949780 BEFORE YOU BEGIN TOOLS AND MATERIALS: We recommend consulting a professional if you are HERRAMIENTAS Y MATERIALES: unfamiliar with installing plumbing �xtures. Signature Hardware accepts no liability for any damage to the console, plumbing, sink, or for personal injury during installation.
  • Página 2: Material Incluido

    B AY H A V E N CONSOLE SINK WITH TRADITIONAL TOP FREGADERO DE CONSOLA CON TAPA TRADICIONAL SKU: 949780 INCLUDED HARDWARE MATERIAL INCLUIDO M6 x 10 Bolt = 6 pcs Perno M6 x 10 = 6 piezas M6 x 15 Bolt = 4 pcs Perno M6 x 15 = 4 piezas Allen Wrench Llave Allen...
  • Página 3: Instalación

    B AY H A V E N CONSOLE SINK WITH TRADITIONAL TOP FREGADERO DE CONSOLA CON TAPA TRADICIONAL SKU: 949780 INSTALLATION 3. Attach top rail to console assembly. Using allen wrench, Secure with provided hardware. INSTALACIÓN 1.Place front rail assembly on �oor as shown. 3.
  • Página 4 B AY H A V E N CONSOLE SINK WITH TRADITIONAL TOP FREGADERO DE CONSOLA CON TAPA TRADICIONAL SKU: 949780 7. Slide side rails in to position on mounting block. 5. Drill pilot holes in marked locations on wall. Insert Using a drill, secure top rail to wall using provided wall anchors into mounting holes.
  • Página 5 B AY H A V E N CONSOLE SINK WITH TRADITIONAL TOP FREGADERO DE CONSOLA CON TAPA TRADICIONAL SKU: 949780 9. Place a level across the lavatory and use cushion 11. Remove the lavatory top from the console. Drill bumpers and shims to level the lavatory. two pilot holes in the marked location of the lavatory mounting points (E) using a 1/4”...
  • Página 6 B AY H A V E N CONSOLE SINK WITH TRADITIONAL TOP FREGADERO DE CONSOLA CON TAPA TRADICIONAL SKU: 949780 12. Carefully turn lavatory upside down on a soft cloth Lavatory or rug. Place a generous portion of silicone sealant on Lavamanos all four corners of the underside of the lavatory.