MaxWest MX-D100 Manual Del Usuario página 14

Press and hold "One Touch Memory" key M1 OR M2 OR M3 for 3.0 second. The
Ÿ
stored phone number will be displayed on the LCD display.
Press "LEFT SOFT KEY" and select the option "Edit" by pressing the UP/DOWN
Ÿ
key.
Press "LEFT SOFT KEY" again. The stored phone number will be displayed on
Ÿ
the LCD display with cursor blinking at the last digit.
Press "RIGHT SOFT KEY" to edit the already stored number.
Ÿ
Press the "LEFT SOFT KEY" to save the edited phone number at the same
Ÿ
memory location.
Remove Phone number stored in One Touch Memory (M1, M2, M3)
Press and hold "One Touch Memory" key M1 OR M2 OR M3 for 3.0 second. The
Ÿ
stored phone number will be displayed on the LCD display.
Ÿ Press "LEFT SOFT KEY" and select the option "Remove" by pressing the
UP/DOWN key.
Press "LEFT SOFT KEY" again. The stored phone number will be removed from
Ÿ
that memory location.
Call Phone number stored in One Touch Memory (M1, M2, M3)
Press "One Touch Memory" key M1 OR M2 OR M3 to call the saved number
Ÿ
directly from the one touch memory M1, M2 & M3.
Note:
If the phone number stored at the One Touch Memory location M1, M2 & M3 is also stored in
the phone book with name, then only the name of called party displays on LCD display during
call phone number stored in one touch memory M1, M2 & M3.
12