ASROCK B150M Pro4S Manual Del Usuario página 140

Creating Windows® 7 Installation Disk with USB 3.0 Drivers
Packed
he USB 3.0 ports on your motherboard require the USB 3.0 drivers to function
properly. Due to the fact that Intel N3000 series SoC and 100 series chipsets have
removed their support for eXtensible Host Controller (xHCI) drivers, please create
a Windows® 7 installation disk with the Intel® USB 3.0 eXtensible Host Controller
(xHCI) drivers packed into the ISO ile by yourself.
Requirements
•
A program that can create and modify ISO iles, such as UltraISO
•
A Windows® 7 installation disk
•
USB 3.0 drivers (included in the ASRock Support CD)
•
A Windows® PC
Instructions
Step 1
Create a new folder under C:\ on your computer. Here we name the folder "asrock" as an
example.
Step 2
Create another two subfolders under the "asrock" folder. Name the subfolder "mount" and
"usb3".
Step 3
Insert the Windows® 7 installation disk into your CD drive.
Step 4
Copy "boot.wim" and "install.wim" iles from the "Sources" folder in the Windows® 7
installation disk to the "asrock" folder created in Step 1.
Step 5
Insert the ASRock Support CD into your CD drive.
Step 6
Go to the folder "Drivers" and then locate the "Intel USB 3.0 Driver" folder.
B150M Pro4S
1