Preparation For Measurement; Non-Contact Preparation; Direct Contact Preparation - MONARCH INSTRUMENT PLT200 Manual De Instrucciones

6.0 PREPARATION FOR MEASUREMENT

6.1 Non-Contact Preparation

For Internal operation (Red laser) or External operation
using optional Remote Optical Sensor (ROS-Red LED).
1. Clean
Shaft

6.2 Direct Contact Preparation

For External operation ONLY using optional Remote
Contact Assembly (RCA).
Select and install contact option:
1. Contact Tip (Convex tip shown.
Use Concave tip for small shafts.)
1.800.544.2843
2. Apply 1/2"
square T-5
Reflective
tape
For Small Shafts:
As small as 1/8" wide
on side or radius edge
www.calcert.com
15
10 20
5 25
0 30
Align flats
sales@calcert.com
E-8