Urrea 6000 Manual Del Usario página 4

• Do not exceed rated torque specifications as
overtorquing can cause screwdriver or part failure.
• Do not use torque instrument to break fasteners
loose.
• Do not use cheater extensions on the handle to
apply torque. Broken or slipping tools can cause
injury.
RATCHET
Ratchet mechanism may slip or break if dirty,
missmatched worn parts are used, or direction level
is not fully engaged.
MANTEINANCE / SERVICE
1. The torque wrench´s internal mechanism is
permanently lubricated during assembly. Do not
attempt to lubricate the internal mechanism.
2. Clean torque wrench by wiping. Do not immerse.
3. Store torque wrench in protective case at its
lowest torque setting. Do not force handle below
lowest setting.
USE INSTRUCTIONS & SETTING THE TORQUE
These Pre-set torque wrenches are designed for use
on production lines and other applications where a
specific torque is required for repetitive
operations. The design, fabrication and materials
used have been developed in coordination with
major manufacturers in actual production use.
1. To set torque values, loosen the set screw (A)
with a 3/32" Allen wrench.
2. Insert a T-handle hex wrench through the
hexagonal adjusment opening (C), in the back of
the handle, until it engages the adjusment screw
(B).