Urrea 6000 Manual Del Usario página 5

3. Place the wrench in a torque meter. Turn the
adjusment screw (B) with the T-handle hex wrench,
clockwise to increase the torque and countercloc-
kwise to reduce it.
5. Tighten the set (A) screw. To be sure that the
wrench adjusment can be repeated, go through
the cycle three more times. If the desired readings
are not obtained, repeat the preceding steps.
Tornillo de ajuste (A)
Adjusting screw
Fig. 1
click
Deje de aplicar fuerza
para que se reinicie
Release force to reset
Mango
Handle
Aplicando fuerza
Apply force
Abertura
hexagonal
de ajuste (c)
Hex adjust
opening
Tornillo de ajuste (B)
Adjusting screw