Publicidad
Idiomas disponibles
Idiomas disponibles
26604_oipm_Vers3.qxd
Palmgren Operating Manual & Parts List
• Rotate vise to desired position. A scale
and indicator are provided for refer-
ence. Tighten hex nuts (Ref. No. 23) to
secure body to swivel base.
• Open jaws of vise and place workpiece
between jaws in desired position.
Secure workpiece between jaws by
rotating handle. Be sure workpiece is
held securely in vise before starting
machining operation.
• Swivel base can be removed to allow
body to be mounted directly to work
surface or table. Be sure to bolt or
clamp body to work surface or table in
at least two mounting locations.
1/27/2005
2:22 PM
Page 3
Particles of metal or wood can damage
machined surfaces, causing difficult or
inaccurate operation.
• The vise is shipped with a protective
• Keep machined surfaces and all mov-
• Keep machined surfaces and lead-
3
M M A A I I N N T T E E N N A A N N C C E E
coating.This coating should be
removed before operation. Use pene-
trating oil to remove protective coating.
ing parts clean and free of dirt, chips
and foreign materials.
screws lubricated with medium weight
machine oil.
26604
Publicidad
