Palmgren 11602A Manual De Operación Y Lista De Partes

Tornillo de banco de angulo industrial

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

operating manual & parts list
6"
INDUSTRIAL ANGLE VISE
Read carefully and follow all safety rules and operating instructions
before first use of this product.
11602A
31483.00 - 0310
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Palmgren 11602A

  • Página 1 & parts list 11602A 6″ INDUSTRIAL ANGLE VISE Ñ Read carefully and follow all safety rules and operating instructions before first use of this product. 31483.00 - 0310...
  • Página 2: Safety Rules

    Palmgren Operating Manual & Parts List 11602A • Do not over tighten—vise can develop DESCRIPTION a large clamping force. Use only force which is needed. • Do not pound or hammer on work- Palmgren 6” Industrial Angle Vise permits accurate positioning at any angle from piece.
  • Página 3: Angle Adjustment

    Palmgren Operating Manual & Parts List 11602A OPERATION MAINTENANCE Refer to Figure 2. Particles of metal or wood can damage machined surfaces, causing difficult or • Mount vise to work surface in desired inaccurate operation. location by securing both mounting •...
  • Página 4 Palmgren Operating Manual & Parts List 11602A Figure 2 - Replacement Parts Illustration for 6″ Industrial Angle Vise...
  • Página 5 Palmgren Operating Manual & Parts List 11602A REPLACEMENT PARTS LIST FOR INDUSTRIAL ANGLE VISE Ref. Part Description Number Qty. Base † Side plate 31429.00 16mm Flat washer 16mm Lock washer 16-2.0 x 35mm Socket head bolt 8-1.25 x 16mm Socket head bolt...
  • Página 6: Tornillo De Banco De Angulo Industrial

    Manual de Operación y Lista de Partes de Palmgren 11602A TORNILLO DE BANCO DE ANGULO INDUSTRIAL No. de Existencia 11602A – 152 mm Antes de utilizar este producto por primera vez, lea cuidadosamente todas las normas de seguridad y las instrucciones de operación y cumpla con las mismas.
  • Página 7: Operacion

    Manual de Operación y Lista de Partes de Palmgren 11602A AJUSTE DEL ANGULO OPERACION • Afloje los cuatro pernos (Ref. No. 5). • Afloje la tuerca (Ref. No. 9). Refiérase a la Figura 2. • Utilice la marca “0” en el cuerpo para •...
  • Página 8 The duration of this warranty is expressly limited to one year parts and labor, unless otherwise noted below beginning from the date of delivery to the original user. The Palmgren products carry the following warranties on parts with a 1 year warranty on labor: •...

Tabla de contenido