BIO UV UV10 Manual De Instalación Y Mantenimiento página 10

BIO-UV
2°/ Particular case : you have a contactor with a coil not supplied with 220-240Vac :
• Take a relay (not provided) which must :
- have the same tension on its coil as on the contactor coil,
- allow at least 5 amperes on its contacts.
• Connect the UV reactor with the adviced relay as shown on the drawing below:
Filtration
Timer
~
• Check that the fuse or circuit breaker is appropriate for the power of all the
connected equipment.
The UV reactor must never be connected to the same terminal
Relay
N L
Pump
...
strip as the filtration pump(s) and/or to the boosters in your
Copyright BIO-UV 03/07/08
Earth
= Green/Yellow
L = Live = Brown (220-240Vac)
N = Neutral = Blue
system.
10