Ebode IPV4NVR Guia De Inicio Rapido página 14

After the adding of the IPC successfully, the video of the corresponding channel has lost in
the live view mode.
Make sure that the IPC display mode is not more than NVR display mode. For example: NVR
display mode for the 4 * 960P, the IPC display mode cannot be 1080P.
Why can't opened web pages on the client be used properly after the NVR server switches
to the 1080P mode?
When the NVR server switches to the 1080P mode, some functions can take effect only
after the server reboots. In this case, log out of the Web client and log in to it again. In
similar cases, for example, changing the IP address and HTTP port of the NVR, you need to
log in to the client again.
www.ebodeelectronics.eu
1-5-2015 - 14 - ebode IPV4NVR